常州森譜諾檢測技術服務有限公司
專注于為全球買家提供產品質量控制和工廠審核服務
專注于產品質量品控服務，為全球的進口商、出口商、零售商和經銷商提供質量控制、檢驗和咨詢解決方案。
常州森譜諾檢測技術服務有限公司常州森譜諾檢測技術服務有限公司
專注于為全球買家提供產品質量控制和工廠審核服務
將您的需求發送郵件至：[email protected]。
下載并填寫預訂表格，通過郵件發回。表格有助于我們獲取必要信息以進行更高效的檢驗。
SUNPOR團隊將立即與您聯系，并與您的供應商協調安排較終檢驗日期，然后向您發送形式發票。
客戶需在檢驗開始日期前數日安排支付檢驗服務費及相關費用。
SUNPOR檢驗員/審核員執行工作，并在檢驗完成后24小時內向客戶提供詳盡全面的報告。
預訂時間：填寫完整的預訂表格及相關訂單細節/檢驗要求，必須在計劃檢驗日期前至少 3個工作日 發送至SUNPOR辦公室。越早預訂，越有利于我們準備和確保所需的檢驗日程。
支付時間：服務費通常需要在檢驗日期前 4個工作日 確認并支付。
支付方式：檢驗前您將收到形式發票，可通過銀行轉賬、支付寶等方式支付。
新客戶及非固定客戶：始終需要在檢驗日期前支付費用。
定期合作的老客戶與VIP客戶：對于安排定期檢驗并與我們保持長期合作的客戶，可以協商月結付款條件。月結發票應在開給VIP客戶后 4個工作日 內支付。
我們的報告非常詳細，包含圖片和圖表，涵蓋以下部分：
摘要（產品、材料、顏色）
數量與抽樣大小
工藝總結（AQL）
工藝缺陷列表
尺寸測量
功能測試
包裝
運輸標志（標簽）
重要備注與專業反饋。
驗廠：幫助您了解合作工廠的背景、合法性、生產能力、質量控制體系等，輔助您做出較終合作決策，并有助于識別假冒合法實體的騙局。
出貨前檢驗（PSI，又稱較終隨機檢驗FRI）：是供應鏈管理的一部分，是在您支付尾款前驗證產品質量的關鍵且可靠的質量控制方法。
為及早發現生產問題，您可以使用我們的生產中期檢驗（DPI） 服務。
默認條件：PSI通常在貨物100%完成生產，且至少80%已裝入外箱時進行（多款產品則每款至少80%已裝箱）。
其他要求：有些客戶要求在產品完成度超過80%且80%已包裝，或100%完成且100%包裝時進行。
建議時間：較好在裝貨日期至少前2天進行PSI。這給予客戶時間審閱報告，工廠也可在發貨前解決檢驗中發現的問題。
SUNPOR采用國際公認標準 ANSI/ASQC Z1.4-2003（等同于MIL-STD-105E, ISO 2859等）來衡量被檢產品的可接受質量水平（AQL）。該標準基于統計理論，通過AQL表索引，其中的抽樣計劃指明了從每批貨中需檢驗的產品單位數量（樣本量）以及判定該批貨可接受性的標準。
中國沿海省份及主要制造業城市。
如果質量檢驗未通過，供應商需要對整批貨物進行返工以修正缺陷產品，而不僅僅是針對已抽檢的AQL樣本量。建議客戶在檢驗失敗后要求重新檢驗，這能合理強化工廠對產品質量要求的理解。重新檢驗通常安排在初始失敗檢驗日期的幾天后。
經SUNPOR檢驗后，有缺陷或意外不合格的貨物離開工廠的情況極為罕見。絕大多數情況下，根本原因是運輸途中損壞，或是檢驗失敗后，基于買家對工廠（本應已返工貨物）的充分信任而批準放行，且未進行重新檢驗或缺陷分揀服務。
因此，我們強烈建議您在檢驗失敗后預訂重新檢驗或缺陷分揀服務，并與您的物流合作伙伴確保產品在運輸途中不受損壞。
1. How do I get started? What are the steps?
1> Please email your inquiry to: [email protected]
2> You can also download our Booking Form, fill it out, and email it back to us. The form specifies the information we need to conduct a more effective inspection.
3> The SUNPOR team will promptly contact you and liaise with your supplier to schedule the final inspection date. We will then send you a proforma invoice.
4> The client arranges payment for the inspection service several days before the inspection start date and settles the relevant fees.
5> SUNPOR inspectors/auditors perform the work and will provide the client with a detailed and comprehensive report within 24 hours after the inspection is completed.
2. How many days in advance should I book? When should I pay for the inspection? How can I pay for the inspection?A completed booking form along with all relevant order details/inspection requirements must be sent to the SUNPOR office at least 3 working days before the planned inspection date. The earlier you book, the better we can prepare and secure the required inspection schedule.
Our service fees typically require confirmation and payment 4 working days before the inspection date.
You will receive a proforma invoice before the inspection, which can be paid via bank transfer, Alipay, etc.
3. Do you offer monthly payment terms?
For new clients and occasional clients, payment is always required before the inspection date.
For regular and VIP clients who schedule periodic inspections and maintain long-term cooperation with us, monthly payment terms can be discussed. Monthly invoices should be paid within 4 working days after they are issued to the VIP client.
4. What information is included in your inspection report?
Our reports are very detailed and include pictures and charts. The report covers:
1> Summary section (Item, Material, Color)
2> Quantity and Sample Size
3> Workmanship Summary (AQL)
4> List of Workmanship Defects
5> Dimensional Measurements
6> Functional Testing
7> Packaging
8> Shipping Marks (Labels)
9> Important Remarks and Professional Feedback.
5. Why do most of our clients choose Factory Audits or Pre-shipment Inspection services?
A Factory Audit (FA) helps you understand who you are placing an order with. The factory's background, legitimacy, capabilities, QC system, etc., are all examined and presented in the report. It helps you make a final decision on whether to work with the factory and can help avoid scammers posing as legitimate entities.
Pre-shipment Inspection (PSI), also known as Final Random Inspection (FRI), is part of supply chain management and is a crucial and reliable quality control method to verify product quality before you settle the final payment.
To detect production issues early, you can use our During Production Inspection (DPI) service.
6. How many days before the loading/shipment date is it better to conduct a Pre-shipment Inspection?
A Pre-shipment Inspection (PSI) is always conducted when the goods are 100% completed and at least 80% packed in the master cartons (if more than one piece, at least 80% of each item must be packed in master cartons) before the inspector arrives. This is set as the default inspection condition.
Some clients require PSI when the goods are over 80% complete and 80% packed.
Some clients require PSI when the goods are 100% complete and 100% packed.
It is recommended that the pre-shipment inspection be conducted at least 2 days before the loading date. This gives the client time to review the report, and any issues found during the inspection can be resolved by the factory before shipment.
7. How is sampling conducted during the inspection?
SUNPOR uses the well-established and widely adopted international standard ANSI/ASQC Z1.4-2003 (equivalent to MIL-STD-105E, ISO 2859, NF06-022, BS 6001, DIN 40080, and GB 2828) to measure the Acceptable Quality Level (AQL) of the inspected products. This standard and its equivalents are designed based on statistical theory and are indexed by AQL tables. The sampling plans within these standards indicate the number of product units to be inspected from each lot or batch (sample size) and the criteria for determining the acceptability of that lot or batch.
8. What is the coverage area of your inspection services?
Coastal provinces and major manufacturing cities in China.
9. What if a batch fails the quality inspection?
If the quality fails the inspection, the supplier is required to rework the entire batch to rectify the defective products, not just the AQL sample size that was inspected. It is recommended that the client requests a re-inspection after a failed inspection, which reasonably reinforces the factory's understanding of product quality requirements. Re-inspections are typically scheduled several days after the initial failed inspection date.
10. What should I do if non-conforming goods are found upon arrival?
It is extremely rare for defective or unexpectedly substandard goods to leave the factory after being inspected by SUNPOR. In the vast majority of cases, the root cause is damage during transportation, or shipment was approved after a failed inspection based on the buyer's sufficient trust in the factory (which should have reworked the goods) to ship without a re-inspection or defect sorting service.
Therefore, we strongly recommend that you book a re-inspection or defect sorting service after a failed inspection and work with your logistics partner to ensure the products are not damaged during transit.
